Technical Parameters for Corrugated Sheet Forming Machine:
Material width: 1220 and 875mm.
The thickness of Coil: 0.2mm-0.6mm.
Application: Wall sheet and roof sheet
The overall dimensions: 8600mmX1500mmX1300mm
Total weight: 5.8T
Main Power: 7.5 KW.
The main parts of Corrugated Sheet Forming Machine:
Manual Uncoiler 1 set
Feeding Guider 1 unit
Roll forming machine 1 set
Hydraulic Cutting system 1 unit
PLC Control System 1 unit
Product Rack 2 PCS
Introductions Of the Corrugated Sheet Forming Machine Parts:
Uncoiler: Manual uncoiler
Inner diameter: 508mm
Outer diameter: 1500mm
Coil Width: 1220mm and 875mm.
Material Thickness: 0.2mm_0.5mm
Loading weight: 5 Tons
Corrugated Sheet Forming Machine
Forming speed: 10-12m/min
Forming stations: 16 stations
Construction Structure: Welded with 36 # H-steel
Material of Shafts: 45# steel with rough finished and then refined
Diameter of the shafts: 70mm
Material of Rollers: High quality 45#steel coated with hard
Processing Technology: Rough processing ---refined processing--Hard
Material of Rack: Complete welded structure of A3 steel plate 18mm
Transmission: Transmitted by the chain and gear.
Material of Chain: 45#steel with heat treatment of HRC45-50°
Main Power: 7.5KW.
Hydrualic Cutting of Corrugated Sheet Forming Machine Line:
Material of cutting blade: Cr12 with quenched treatment 60-62
Hydraulic Power: 3KW.
Cutting Length and Quantity: Clients can set the required length
and quantity on the PLC touch screen
Control System: Panasonic PLC Control, LCD screen, touch screen,
Voltage: 380V/50Hz/3phase OR based on required standard.
Automatically measure the length and quantity