Technical Parameters for Corrugated Roofing Roll Forming Machine:
Material width: 762mm.
The thickness of Coil: 0.27mm-0.3mm (hard material G550MPA)
Application: wall sheet and roof sheet
The overall dimensions: 8600mmX1400mmX1300mm
Total weight: 5.8T
Main Power: 5.5 KW
The main parts of Corrugated Roofing Roll Forming Machine:
Roll forming machine
Hydraulic Cutting system
PLC Control System
Introductions Of Corrugated Roofing Roll Forming Machine:/
Uncoiler: Manual Uncoiler
Inner diameter : 508mm
Outer diameter: 1500mm
Coil Width: 1000mm.
Material Thickness: 0.27mm—0.3mm (hard material G550MPA)
Loading weight: 5 Tons
Corrugated Roofing Roll Forming Machine
Forming stations: 16 stations
Construction Structure: welded with 36 # H-steel
Material of Shafts: 45# steel with rough finished and then refined
Diameter of the shafts:70mm
Material of Rollers: high quality 45#steel coated with hard
Processing Technology: rough processing ---refined processing--Hard
Material of Rack: complete welded structure of A3 steel plate 18 mm
Transmission: Transmitted by the chain and gear.
Material of Chain: 45#steel with heat treatment of HRC45-50°
Main Power: 5.5KW.
Hydraulic Cutting for Corrugated Roofing Roll Forming Machine:
Material of cutting blade:Cr12 with quenched treatment 60-62
Hydraulic Power: 4 KW.
Cutting Length and Quantity: Clients can set the required length
and quantity on the PLC touch screen
Control System: Panasonic PLC Control, LCD screen, touch screen,
Voltage: 380V/50HZ/3phase OR based on required standard.
Automatically measure the length and quantity